Hot Sale
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 135mm
$928.00 $878.00
We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 135mm
Holds a 3-Axis work-piece in position before weldingWith the push of the buttons the threaded screws easily slide in and outWhen the job is finished simply swing away the 3rd axis arm for quick and easy removalHolds parts in position during cool down to minimize distortion due to contractionModel WAC45SW comes with a curved arm for greater work-piece clearance Miter Joints : 121mmJaw Length : 135mmT Clearance : 100mmJaw Height : 57mm frame width=”420″ height=”315″
Out of stock
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 135mmIMPORTANT SHIPPING CHANGES: Urban Shipping is to Commercially Zoned Business Addresses Only. Delivery to residential addresses is NO LONGER AVAILABLE. Shipping to rural addresses is NO LONGER AVAILABLE. Rural deliveries MUST NOW BE PICKED UP FROM LOCAL URBAN FREIGHT DEPOTS.
Related products
- Batteries & Chargers
HELVI® Starter Digicar 900 12/24V 230 (BACKORDER – 3 month delivery)
$1,798.22$1,663.22We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
We have reduced the price of all listings and added shipping costs. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
BACKORDER ITEM ONLY – 3 month delivery. Please inquire if you have placed an order and require an update on shipping.
HELVI® Starter Digicar 900 12/24V 230
Starter DIGICAR 900 – Helvi #99010036 The battery chargers equipped with CPS Safe Car system allow the charge or starting (boosting) of the vehicles in safety mode with the goal to preserve the integrity of both the battery and the electronics on board. Autostar range: Starting (Boosting) function with safety mode. The Autostar range thanks to the CPS _ Car Protection system, allow the boosting of the vehicles in total safety. An electronic control allow to verify the charge status of the battery on board. The boosting start only within certain conditions. The pcb control the output voltage spikes in order to protect the electronics on board. Digicar range: this range has both the safety boosting mode and the possibility to control and set the charge of the batteries in an efficient mode, without disconneting the battery from its terminals. This battery charger is fit to start modern motor vehicles, avoiding the risk of damages to the vehicle electronic devices. Automatic charging and maintenance function. Specs: – Plug: 1 phase – 230V 50/60 Hz – Power: 1200W – Battery: 12 – 24 V – Amp. Eff.: 50 A – Amp. 60335-2-29: 40 A – Amp 1/C: 380 – Rated Ref. Cap.: 600 Ah 15h – Dimensions (LxWxH): 320 x 487 x 745 – Weight: 35 kg
- Welding
STRONG HAND® Adjust-O™ Angle Magnet 50kg
$536.88$496.88We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® Adjust-O™ Angle Magnet 50kg
Adjustable from 30° – 275° with two On/Off switchesPrecision machined flat surfaces and nickel/chrome bodyV-Groove surfaces securely hold round and square tubing, angle and flat stock
Product Code: MAGO-MAV120
Key Size: 50kg - Welders
TIG200PXP OPTIONAL ACCESSORY – footpedal (others available)
$444.00$319.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
TIG200PXP OPTIONAL ACCESSORIES – PLEASE INQUIRE: email sales@tech1tools.co.nz
Prices as follows:
1. XA-RFC XcelArc Remote Foot Control TIG200PXP ACDC, TIG315ACDC $369.00
2. ER1MS-10 XA Momentary Suregrip Tig Switch + 10K Pot $108.00
3. XA-TIG200PXP-K XA TIG200PXP AC/DC Inverter Welder – 4m Tig Package (Replaces the E101) $2,479.00
4. XG-ARLFM25TW XcelGas Argon Twin Flowmeter Regulator 25 l/min $198.00
5. SGT26-S125GS4 Parker 26 Suregrip Tig Torch x 8m Surelok QF Gas Conn $479.00
CHOOSE Tech1Tools NZ Ltd
+ Super friendly service and fast delivery
+ GST invoice supplied at buyer’s request
+ Check our feedback: we’ve got your back! - Welding
STRONGHAND® 2 X Corner Welding Magnets
$172.11$128.91We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® 2 X Corner Welding Magnets
We use these magnets in our workshop and they are really usefull for locking right angle corners in place for welding, particularly where space is to tight to fit regular arrow shape magnets.
Time saving magnetic tools for use in the shop & in the field.
Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
One side corner “relief” provides clearance for tall lips.
Use the outer edges of the Corner Magnet for setting up materials at 60° and 120°.
Max. Pull Force: 30 LBS (14kg)
Dimensions: 83 x 95 x 16 mm - Welding
STRONG HAND® Grounding Magnet-500A x 50kg
$242.00$202.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
Strong Hand® Grounding Magnet-500A x 50kg. Sets up quickly and easily – start grounding instantly. Powerful rare earth magnet delivers heavy duty holding power. The V machined surface grips round parts. The copper connector stud is located on top and allows for a full 360 degree cable rotation. Rugged, compact steel housing for a fast and safe ground, even in tight spots!
- Welders
Helvi® FOX 190S MIG/MMA/TIG Inverter Welder
$2,098.00$1,973.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
Helvi® welders are professional level welding machines designed for commercial use. The pulse function makes them the perfect panel shop welder for welding thin material.
Helvi® FOX 190S MIG/MMA/TIG Inverter Welder
Helvi FOX 190S MIG/MMA/TIG Inverter Welder
Product Features:
Insulation Class: H.
Voltage: 240V 1 Phase.
Ingress protection: IP22S.
Power (60%): 3.5KVa.
Electrode type: 6013.
Electrode dia: 1.6-3.25mm.
Dimensions (mm): 480x220x385mm.
Uo: (MMA/TIG/MIG): 58/58/30V.
Welding Current (MMA/TIG/MIG): 5-175/5-175/30-180 Amps.
Wire Size (mm):.
0.8 – 1.0mm Aluminium.
0.6 – 1.0mm Steel.
0.8 – 1.0mm Flux core.
0.8 – 1.0mm Stainless steel.
0.8 – 1.0mm Brazing.
Duty Cycle 40degC (MMA):.
20% @ 175 Amps.
60% @ 100 Amps.
100% @ 80 Amps.
Duty Cycle 40degC (TIG):.
25% @ 175 Amps.
60% @ 115 Amps.
100% @ 90 Amps.
Duty Cycle 40degC (MIG):.
20% @ 180 Amps.
Reviews
There are no reviews yet.