Hot
STRATA GCW24P-LPG – Oxy LPG Gas Welding Kit Oxy / LPG Kit (incl. 2 x cutting nozzles)
GCW24P-LPG – Oxy LPG Gas Welding Kit Overview Cuts up to 6″ (150mm). Welds up to 3/8″ (9 mm) steel. Features Brass & Stainless steel construction Torch handle w/two stainless steel needle valves for fast, accurate flame adjustment Complete accessory package, hose, sparklighter, goggles plus tip cleaner and replacement O-rings O-ring seals Forged and extruded brass for durability External torch mounted reverse flow check valves Steel toolbox packageIMPORTANT SHIPPING CHANGES: Urban Shipping is to Commercially Zoned Business Addresses Only. Delivery to residential addresses is NO LONGER AVAILABLE. Shipping to rural addresses is NO LONGER AVAILABLE. Rural deliveries MUST NOW BE PICKED UP FROM LOCAL URBAN FREIGHT DEPOTS.
Related products
- Welding
Strong Hand BuildPro™ Welding Table – 1160 x 1000
$5,598.00$4,703.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
Strong Hand BuildPro™ Welding Table – 11960 x 1000 x 900
BuildPro™ Welding Table
Strong Hand TMB61210 BuildPro Welding Table 1160 x 1000mmPart Number:TABW-TMB612101 – TMB62010 Welding Table Plate Thickness: 16mm Grid Pattern: 50 x 50mm Slots of 40mmTo request further information, please contact us through our website for more information so we can best meet your needs.
- Welding
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 135mm
$928.00$878.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 135mm
Holds a 3-Axis work-piece in position before weldingWith the push of the buttons the threaded screws easily slide in and outWhen the job is finished simply swing away the 3rd axis arm for quick and easy removalHolds parts in position during cool down to minimize distortion due to contractionModel WAC45SW comes with a curved arm for greater work-piece clearance Miter Joints : 121mmJaw Length : 135mmT Clearance : 100mmJaw Height : 57mm frame width=”420″ height=”315″
- Welding
JASIC® MIG/MMA/TIG 160 AMP WELDER
$1,692.00$1,573.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
JASIC® MIG/MMA/TIG 160 AMP WELDER
The Jasic MIG160 is an inverter-based portable Mig welding machine with added Stick and Tig function. The Mig function allows you
to weld with both Gas Shielded and Gasless wire. Easy stepless adjustment of voltage and wire feed make for easy setting of welding
parameters giving excellent, professional welding results.
Added STICK welding capability delivers easy electrode welding with high quality results, including cast Iron, stainless and low hydrogen.
Connection of the 17V Tig torch provides quality DC Tig (Lift Arc ignition) welding of steel, stainless steel and copper.MAIN FEATURES
– Adjustable Burn Back
• DC TIG
– Ultra smooth DC TIG welding current
• Internal wire feeder, gear driven for up to 200mm Ø spool
• Spool Gun Connection
TECHNICAL DATA
Duty Cycle @ 40°c as per AS/NZ60974 35% @ 160 Amps MIG
35% @ 160 Amps MMA
Rated Power MIG (KVA) 5.8
Rated Power MMA (KVA) 7.0
Wire Diameter Range (mm) Steel 0.6, 0.8, 0.9
Aluminium 0.9, 1.0, 1.2
Flux Core 0.8, 0.9, 1.2
Dimensions Power Source (LxWxH) 528x250x425mm
Weight Power Source 18 Kg
24 Month Warranty - Batteries & Chargers
HELVI® Starter Digicar 900 12/24V 230 (BACKORDER – 3 month delivery)
$1,798.22$1,663.22We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
We have reduced the price of all listings and added shipping costs. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
BACKORDER ITEM ONLY – 3 month delivery. Please inquire if you have placed an order and require an update on shipping.
HELVI® Starter Digicar 900 12/24V 230
Starter DIGICAR 900 – Helvi #99010036 The battery chargers equipped with CPS Safe Car system allow the charge or starting (boosting) of the vehicles in safety mode with the goal to preserve the integrity of both the battery and the electronics on board. Autostar range: Starting (Boosting) function with safety mode. The Autostar range thanks to the CPS _ Car Protection system, allow the boosting of the vehicles in total safety. An electronic control allow to verify the charge status of the battery on board. The boosting start only within certain conditions. The pcb control the output voltage spikes in order to protect the electronics on board. Digicar range: this range has both the safety boosting mode and the possibility to control and set the charge of the batteries in an efficient mode, without disconneting the battery from its terminals. This battery charger is fit to start modern motor vehicles, avoiding the risk of damages to the vehicle electronic devices. Automatic charging and maintenance function. Specs: – Plug: 1 phase – 230V 50/60 Hz – Power: 1200W – Battery: 12 – 24 V – Amp. Eff.: 50 A – Amp. 60335-2-29: 40 A – Amp 1/C: 380 – Rated Ref. Cap.: 600 Ah 15h – Dimensions (LxWxH): 320 x 487 x 745 – Weight: 35 kg
- Welding
JASIC® Mig Welder 350A – 415v 3 Phase
$3,798.00$3,673.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
JASIC® Mig Welder 350A – 415v 3 Phase
The Jasic MIG350 is a multi-function MIG welding machine with added MMA and TIG function. The MIG function allows you to weld both Gas /Gasless wires. Step less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire Inch feeds the wire during set up without gas; the Burn Back adjustment leaves the wire stick out ready for the next weld. Certified to – AS/NZ60974.1
Features
Latest IGBT inverter technology
MIG/MAG Gas/Gasless
-Soft Start
-Burn Back Control
-Wire Inch
MMA function
– Hot start
– Arc Force
DC TIG
– Lift Arc ignition
4 roll geared wire feeder
Excellent Mig welding with CO2 gas
Technical Data
Power Supply / Phases (V-Ph) 415 -3 +/- 15%
Duty Cycle @ 25°c 70% @ 350 Amps
Output Current Range MIG 40A – 350A
Output Current Range MMA 20A – 350A
Output Voltage Range 15-38V
Rated Power MIG 13.9 KVA
Rated Power MMA 15.0 KVA
I Max MIG 19.4 A
MMA 20.9 A
I ieff MIG 12.3 A
MMA 13.2 A
Wire Feeder Type Gear Driven 4 Roll
Wire Speed Range 1.5 – 15m/min
Efficiency 85%
Protection Class IP 21S
Dimensions (LxWxH) 900x400x670mm
Weight 60 Kg
Warranty 24 months machine only
Certification Approval AS/NZ60974.1 - Welding
HELVI® GALILEO 215 MMA/TIG Inverter Welder
$1,026.88$931.88We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
HELVI® GALILEO 215 MMA/TIG Inverter Welder
HELVI TIG WELDER: GALILEO 215 MMA/TIG 230V
Product Features
Insulation Class: H.
Torches, earth leads, arc leads, regulators are additional.
Voltage: 240V 1 Phase.
Uo: 65V.
Electrode type: 6013 – 7018.
Ingress protection: IP22S.
Power (60%): 4KW.
Welding Current: 5-200 Amps.
Dimensions (mm): 370x140x245mm.
60% @ 150 Amps.
Duty Cycle 40degC.
Wire Size (mm):.
35% @ 200 Amps.
1.6 – 5.0mm.CHOOSE Tech1Tools NZ Ltd
+ Super friendly service and fast delivery
+ GST invoice supplied at buyer’s request
+ Check our feedback: we’ve got your back!
Reviews
There are no reviews yet.