Hot
STRATA GCW24P-LPG – Oxy LPG Gas Welding Kit Oxy / LPG Kit (incl. 2 x cutting nozzles)
GCW24P-LPG – Oxy LPG Gas Welding Kit Overview Cuts up to 6″ (150mm). Welds up to 3/8″ (9 mm) steel. Features Brass & Stainless steel construction Torch handle w/two stainless steel needle valves for fast, accurate flame adjustment Complete accessory package, hose, sparklighter, goggles plus tip cleaner and replacement O-rings O-ring seals Forged and extruded brass for durability External torch mounted reverse flow check valves Steel toolbox packageIMPORTANT SHIPPING CHANGES: Urban Shipping is to Commercially Zoned Business Addresses Only. Delivery to residential addresses is NO LONGER AVAILABLE. Shipping to rural addresses is NO LONGER AVAILABLE. Rural deliveries MUST NOW BE PICKED UP FROM LOCAL URBAN FREIGHT DEPOTS.
Related products
- Welding
STRONG HAND® 75KG Switchable Welding Magnet
$179.98$149.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® 75KG Switchable Welding Magnet
We use these magnets in our workshop and they are simply brilliant. The real advantage over non switchable magnets is being able to turn the magnet off to release without the concern of your pieces of steel being pulled out of alignment for welding.
Product Code: MAGS-MSA48HD
Key Size: 75kg
The fast & easy way to hold metal workpieces at 45° & 90°.
Turn the magnet Off when setting up, turn On when you’re ready to work. Fast and safe set-up!
Ideal for round and square tubing, angle, and flat stock.
Easy to clean. Simply turn Off and wipe.
Max Pull Force: 75kg
Dimensions: 152 x 130 x 35mm - Welding
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 135mm
$928.00$878.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 135mm
Holds a 3-Axis work-piece in position before weldingWith the push of the buttons the threaded screws easily slide in and outWhen the job is finished simply swing away the 3rd axis arm for quick and easy removalHolds parts in position during cool down to minimize distortion due to contractionModel WAC45SW comes with a curved arm for greater work-piece clearance Miter Joints : 121mmJaw Length : 135mmT Clearance : 100mmJaw Height : 57mm frame width=”420″ height=”315″
- Welders
Helvi® MAXITECH 360 C Welder
$8,248.00$8,123.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
Helvi® welders are professional level welding machines designed for commercial use. The pulse function makes them the perfect panel shop welder for welding thin material.
Helvi® MAXITECH 360 C Welder
Microprocessor-controlled multi-process welding inverter suitable for MIG/MAG (manual, synergic or pulsed), TIG-DC (continuous or pulsed) and MMA welding. The large 3.3” display shows all the welding parameters, and makes their setting easy and intuitive. In synergic MIG/MAG welding, the microprocessor ensures easy and quick setting of the programs thus always guaranteeing optimal arc stability and highest weld quality. MIG-MAG features:
DC controlled or pulsed welding – pre-set synergic curves – Program storage of your own custom weld parameters; 2T/4T, spot function – pre-post gas time regulation – electronic reactance, soft start, burn-back time, hot start, slope down, crater filler. In pulsed mode welding it is unbeatable and guarantees excellent quality results on the thinnest of materials. - Welding
JASIC® MIG/MMA/TIG 250 AMP WELDER
$2,548.00$2,373.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
JASIC® MIG/MMA/TIG 250 AMP WELDER
The Jasic MIG250 is a 15amp single phase multi-function MIG welding machine with MMA and TIG function. The MIG function allows you to weld both Gas /Gasless wires. Step less adjustment of voltage and wire feed make setting of welding parameters easy giving excellent. Burn Back adjustment leaves the wire stick out ready for the next weld. Spoolgun ready function allows connection of the SPG200 Spoolgun for use of thin or softer wires such as aluminium that don’t have the column strength to feed through standard Mig torches. Connection of the PWP17V Tig torch provides quality DC Tig with Lift Arc start for welding of steel, stainless steel and copper.
Features
Latest IGBT inverter technology
MIG/MAG with Gas and Gasless wire function
-Soft Start
-Burn Back Control
-Wire Inch
MMA function
– Hot start
– Arc Force
DC TIG
– Lift Arc ignition
2 roll geared wire feeder
Excellent Mig welding with CO2 gas
Technical Data
Duty Cycle @ 25°c 60% @ 200ADimensions (LxWxH) 900x400x670mm
Weight 57KgStandard package Includes: Jasic MIG250 Machine, SGB24 Suregrip Mig Torch 4m, Earth Lead, Arc Lead 25mm x 4m, Argon Regulator
Optional Extras:
Spoolgun ($740 incl gst) – part number: XASP24-24-P1-60ER
TIG Kit 4m ($165 incl gst) – Part No. PTK3 - Welding
STRONG HAND® 2 X CORNER WELDING MAGNETS (1 pair)
$89.86$39.86We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® 2 X CORNER WELDING MAGNETS (1 pair)
We use these magnets in our workshop and they are really useful for locking right angle corners in place for welding, particularly where space is to tight to fit regular arrow shape magnets.
Product Code: MAGC-MST327
Key Size: 14kg (2pc)
Time saving magnetic tools for use in the shop & in the field.
Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
One side corner “relief” provides clearance for tall lips.
Use the outer edges of the Corner Magnet for setting up materials at 60° and 120°.
Max. Pull Force: 30 LBS (14kg)
Dimensions: 83 x 95 x 16 mm - Welding
STRONGHAND® 2 X Corner Welding Magnets
$172.11$128.91We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® 2 X Corner Welding Magnets
We use these magnets in our workshop and they are really usefull for locking right angle corners in place for welding, particularly where space is to tight to fit regular arrow shape magnets.
Time saving magnetic tools for use in the shop & in the field.
Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
One side corner “relief” provides clearance for tall lips.
Use the outer edges of the Corner Magnet for setting up materials at 60° and 120°.
Max. Pull Force: 30 LBS (14kg)
Dimensions: 83 x 95 x 16 mm
Reviews
There are no reviews yet.