STRONG HAND® Adjust-O™ Angle Magnet 50kg
$516.88 $498.00
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® Adjust-O™ Angle Magnet 50kg
Adjustable from 30° – 275° with two On/Off switchesPrecision machined flat surfaces and nickel/chrome bodyV-Groove surfaces securely hold round and square tubing, angle and flat stock
Product Code: MAGO-MAV120
Key Size: 50kg
500 in stock
STRONG HAND® Adjust-O™ Angle Magnet 50kg
Related products
- Batteries & Chargers
HELVI® Starter Digicar 900 12/24V 230 (BACKORDER – 3 month delivery)
$1,798.22$1,698.22PRICE INCLUDES FREE NATIONWIDE FREIGHT
BACKORDER ITEM ONLY – 3 month delivery. Please inquire if you have placed an order and require an update on shipping.
HELVI® Starter Digicar 900 12/24V 230
Starter DIGICAR 900 – Helvi #99010036 The battery chargers equipped with CPS Safe Car system allow the charge or starting (boosting) of the vehicles in safety mode with the goal to preserve the integrity of both the battery and the electronics on board. Autostar range: Starting (Boosting) function with safety mode. The Autostar range thanks to the CPS _ Car Protection system, allow the boosting of the vehicles in total safety. An electronic control allow to verify the charge status of the battery on board. The boosting start only within certain conditions. The pcb control the output voltage spikes in order to protect the electronics on board. Digicar range: this range has both the safety boosting mode and the possibility to control and set the charge of the batteries in an efficient mode, without disconneting the battery from its terminals. This battery charger is fit to start modern motor vehicles, avoiding the risk of damages to the vehicle electronic devices. Automatic charging and maintenance function. Specs: – Plug: 1 phase – 230V 50/60 Hz – Power: 1200W – Battery: 12 – 24 V – Amp. Eff.: 50 A – Amp. 60335-2-29: 40 A – Amp 1/C: 380 – Rated Ref. Cap.: 600 Ah 15h – Dimensions (LxWxH): 320 x 487 x 745 – Weight: 35 kg
- Welding
JASIC® MIG/MMA/TIG 160 AMP WELDER
$1,692.00$1,598.00PRICE INCLUDES FREE NATIONWIDE FREIGHT
JASIC® MIG/MMA/TIG 160 AMP WELDER
The Jasic MIG160 is an inverter-based portable Mig welding machine with added Stick and Tig function. The Mig function allows you
to weld with both Gas Shielded and Gasless wire. Easy stepless adjustment of voltage and wire feed make for easy setting of welding
parameters giving excellent, professional welding results.
Added STICK welding capability delivers easy electrode welding with high quality results, including cast Iron, stainless and low hydrogen.
Connection of the 17V Tig torch provides quality DC Tig (Lift Arc ignition) welding of steel, stainless steel and copper.MAIN FEATURES
– Adjustable Burn Back
• DC TIG
– Ultra smooth DC TIG welding current
• Internal wire feeder, gear driven for up to 200mm Ø spool
• Spool Gun Connection
TECHNICAL DATA
Duty Cycle @ 40°c as per AS/NZ60974 35% @ 160 Amps MIG
35% @ 160 Amps MMA
Rated Power MIG (KVA) 5.8
Rated Power MMA (KVA) 7.0
Wire Diameter Range (mm) Steel 0.6, 0.8, 0.9
Aluminium 0.9, 1.0, 1.2
Flux Core 0.8, 0.9, 1.2
Dimensions Power Source (LxWxH) 528x250x425mm
Weight Power Source 18 Kg
24 Month Warranty - Welding
JASIC® Mig Welder 350A – 415v 3 Phase
$3,798.00$3,698.00PRICE INCLUDES FREE NATIONWIDE FREIGHT
JASIC® Mig Welder 350A – 415v 3 Phase
The Jasic MIG350 is a multi-function MIG welding machine with added MMA and TIG function. The MIG function allows you to weld both Gas /Gasless wires. Step less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire Inch feeds the wire during set up without gas; the Burn Back adjustment leaves the wire stick out ready for the next weld. Certified to – AS/NZ60974.1
Features
Latest IGBT inverter technology
MIG/MAG Gas/Gasless
-Soft Start
-Burn Back Control
-Wire Inch
MMA function
– Hot start
– Arc Force
DC TIG
– Lift Arc ignition
4 roll geared wire feeder
Excellent Mig welding with CO2 gas
Technical Data
Power Supply / Phases (V-Ph) 415 -3 +/- 15%
Duty Cycle @ 25°c 70% @ 350 Amps
Output Current Range MIG 40A – 350A
Output Current Range MMA 20A – 350A
Output Voltage Range 15-38V
Rated Power MIG 13.9 KVA
Rated Power MMA 15.0 KVA
I Max MIG 19.4 A
MMA 20.9 A
I ieff MIG 12.3 A
MMA 13.2 A
Wire Feeder Type Gear Driven 4 Roll
Wire Speed Range 1.5 – 15m/min
Efficiency 85%
Protection Class IP 21S
Dimensions (LxWxH) 900x400x670mm
Weight 60 Kg
Warranty 24 months machine only
Certification Approval AS/NZ60974.1 - Welding
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 122mm
$518.00$498.00PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 122mm
Holds a 3-Axis work-piece in position before welding. With the push of the buttons the threaded screws easily slide in and out. When the job is finished simply swing away the 3rd axis arm for quick and easy removal. Holds parts in position during cool down to minimize distortion due to contraction. Model WAC45SW comes with a curved arm for greater work-piece clearance. Miter Joints : 95mm Jaw Length : 122mm T Clearance : 62mm Jaw Height : 35mm frame width=”420″ height=”315″
- Welders
HELVI® MAXITECH 360 C Welder
$8,198.00$8,088.00PRICE INCLUDES FREE NATIONWIDE FREIGHT
Helvi® welders are professional level welding machines designed for commercial use. The pulse function makes them the perfect panel shop welder for welding thin material.
Helvi® MAXITECH 360 C Welder
Microprocessor-controlled multi-process welding inverter suitable for MIG/MAG (manual, synergic or pulsed), TIG-DC (continuous or pulsed) and MMA welding. The large 3.3” display shows all the welding parameters, and makes their setting easy and intuitive. In synergic MIG/MAG welding, the microprocessor ensures easy and quick setting of the programs thus always guaranteeing optimal arc stability and highest weld quality. MIG-MAG features:
DC controlled or pulsed welding – pre-set synergic curves – Program storage of your own custom weld parameters; 2T/4T, spot function – pre-post gas time regulation – electronic reactance, soft start, burn-back time, hot start, slope down, crater filler. In pulsed mode welding it is unbeatable and guarantees excellent quality results on the thinnest of materials. - Welding
STRONGHAND® 2 X Corner Welding Magnets
$129.36$121.98PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® 2 X Corner Welding Magnets
We use these magnets in our workshop and they are really usefull for locking right angle corners in place for welding, particularly where space is to tight to fit regular arrow shape magnets.
Time saving magnetic tools for use in the shop & in the field.
Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
One side corner “relief” provides clearance for tall lips.
Use the outer edges of the Corner Magnet for setting up materials at 60° and 120°.
Max. Pull Force: 30 LBS (14kg)
Dimensions: 83 x 95 x 16 mm
Reviews
There are no reviews yet.