Hot
STRATA GCW24P-LPG – Oxy LPG Gas Welding Kit Oxy / LPG Kit (incl. 2 x cutting nozzles)
GCW24P-LPG – Oxy LPG Gas Welding Kit Overview Cuts up to 6″ (150mm). Welds up to 3/8″ (9 mm) steel. Features Brass & Stainless steel construction Torch handle w/two stainless steel needle valves for fast, accurate flame adjustment Complete accessory package, hose, sparklighter, goggles plus tip cleaner and replacement O-rings O-ring seals Forged and extruded brass for durability External torch mounted reverse flow check valves Steel toolbox packageIMPORTANT SHIPPING CHANGES: Urban Shipping is to Commercially Zoned Business Addresses Only. Delivery to residential addresses is NO LONGER AVAILABLE. Shipping to rural addresses is NO LONGER AVAILABLE. Rural deliveries MUST NOW BE PICKED UP FROM LOCAL URBAN FREIGHT DEPOTS.
Related products
- Welders
TIG200PXP OPTIONAL ACCESSORY – footpedal (others available)
$444.00$319.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
TIG200PXP OPTIONAL ACCESSORIES – PLEASE INQUIRE: email sales@tech1tools.co.nz
Prices as follows:
1. XA-RFC XcelArc Remote Foot Control TIG200PXP ACDC, TIG315ACDC $369.00
2. ER1MS-10 XA Momentary Suregrip Tig Switch + 10K Pot $108.00
3. XA-TIG200PXP-K XA TIG200PXP AC/DC Inverter Welder – 4m Tig Package (Replaces the E101) $2,479.00
4. XG-ARLFM25TW XcelGas Argon Twin Flowmeter Regulator 25 l/min $198.00
5. SGT26-S125GS4 Parker 26 Suregrip Tig Torch x 8m Surelok QF Gas Conn $479.00
CHOOSE Tech1Tools NZ Ltd
+ Super friendly service and fast delivery
+ GST invoice supplied at buyer’s request
+ Check our feedback: we’ve got your back! - Welding
STRONG HAND® 75KG Switchable Welding Magnet
$179.98$149.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® 75KG Switchable Welding Magnet
We use these magnets in our workshop and they are simply brilliant. The real advantage over non switchable magnets is being able to turn the magnet off to release without the concern of your pieces of steel being pulled out of alignment for welding.
Product Code: MAGS-MSA48HD
Key Size: 75kg
The fast & easy way to hold metal workpieces at 45° & 90°.
Turn the magnet Off when setting up, turn On when you’re ready to work. Fast and safe set-up!
Ideal for round and square tubing, angle, and flat stock.
Easy to clean. Simply turn Off and wipe.
Max Pull Force: 75kg
Dimensions: 152 x 130 x 35mm - Batteries & Chargers
HELVI® Starter Digicar 900 12/24V 230 (BACKORDER – 3 month delivery)
$1,798.22$1,663.22We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
We have reduced the price of all listings and added shipping costs. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
BACKORDER ITEM ONLY – 3 month delivery. Please inquire if you have placed an order and require an update on shipping.
HELVI® Starter Digicar 900 12/24V 230
Starter DIGICAR 900 – Helvi #99010036 The battery chargers equipped with CPS Safe Car system allow the charge or starting (boosting) of the vehicles in safety mode with the goal to preserve the integrity of both the battery and the electronics on board. Autostar range: Starting (Boosting) function with safety mode. The Autostar range thanks to the CPS _ Car Protection system, allow the boosting of the vehicles in total safety. An electronic control allow to verify the charge status of the battery on board. The boosting start only within certain conditions. The pcb control the output voltage spikes in order to protect the electronics on board. Digicar range: this range has both the safety boosting mode and the possibility to control and set the charge of the batteries in an efficient mode, without disconneting the battery from its terminals. This battery charger is fit to start modern motor vehicles, avoiding the risk of damages to the vehicle electronic devices. Automatic charging and maintenance function. Specs: – Plug: 1 phase – 230V 50/60 Hz – Power: 1200W – Battery: 12 – 24 V – Amp. Eff.: 50 A – Amp. 60335-2-29: 40 A – Amp 1/C: 380 – Rated Ref. Cap.: 600 Ah 15h – Dimensions (LxWxH): 320 x 487 x 745 – Weight: 35 kg
- Welding
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 122mm
$548.00$498.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
STRONG HAND® Welders Angle Clamp (3-Axis) Jaw Length 122mm
Holds a 3-Axis work-piece in position before welding. With the push of the buttons the threaded screws easily slide in and out. When the job is finished simply swing away the 3rd axis arm for quick and easy removal. Holds parts in position during cool down to minimize distortion due to contraction. Model WAC45SW comes with a curved arm for greater work-piece clearance. Miter Joints : 95mm Jaw Length : 122mm T Clearance : 62mm Jaw Height : 35mm frame width=”420″ height=”315″
- Welding
JASIC® Mig Welder 350A – 415v 3 Phase
$3,798.00$3,673.00We have reduced all prices and added the corresponding shipping fees. Free nationwide shipping is no longer available.
PRICE INCLUDES FREE NATIONWIDE FREIGHT
JASIC® Mig Welder 350A – 415v 3 Phase
The Jasic MIG350 is a multi-function MIG welding machine with added MMA and TIG function. The MIG function allows you to weld both Gas /Gasless wires. Step less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results. Wire Inch feeds the wire during set up without gas; the Burn Back adjustment leaves the wire stick out ready for the next weld. Certified to – AS/NZ60974.1
Features
Latest IGBT inverter technology
MIG/MAG Gas/Gasless
-Soft Start
-Burn Back Control
-Wire Inch
MMA function
– Hot start
– Arc Force
DC TIG
– Lift Arc ignition
4 roll geared wire feeder
Excellent Mig welding with CO2 gas
Technical Data
Power Supply / Phases (V-Ph) 415 -3 +/- 15%
Duty Cycle @ 25°c 70% @ 350 Amps
Output Current Range MIG 40A – 350A
Output Current Range MMA 20A – 350A
Output Voltage Range 15-38V
Rated Power MIG 13.9 KVA
Rated Power MMA 15.0 KVA
I Max MIG 19.4 A
MMA 20.9 A
I ieff MIG 12.3 A
MMA 13.2 A
Wire Feeder Type Gear Driven 4 Roll
Wire Speed Range 1.5 – 15m/min
Efficiency 85%
Protection Class IP 21S
Dimensions (LxWxH) 900x400x670mm
Weight 60 Kg
Warranty 24 months machine only
Certification Approval AS/NZ60974.1
Reviews
There are no reviews yet.